As winter arrives, many homes in Spain start to show dark stains in corners, water droplets on windows, or that characteristic musty smell. Before thinking about what colour to choose for the living room, it is worth understanding what type of humidity lies behind those marks, because it determines whether a coat of paint will last years or fail within weeks.
Why mould returns every winter even after cleaning
Condensation: the most common cause in cold months
Most humidity problems that appear between November and March do not come from a leak or burst pipe, but from condensation. Mould needs organic matter, mild temperature, and sustained humidity, and condensation is the variable that provides that moisture. When water vapour from inside touches a cold wall, a poorly insulated corner, or a window pane, it turns into droplets, and if that water does not evaporate, mould finds the perfect environment to settle.
This explains why cleaning the stains is not enough. Condensation is chronic humidity that does not disappear on its own once it appears, and as long as the conditions that cause it remain, the fungus grows back on the freshly applied paint.
How to distinguish it from other types of humidity
Not every mark on a wall is condensation. It is worth paying attention to some signs before deciding what to do:
- Condensation: appears mainly in winter, in high areas, corners and behind furniture, and usually comes with water droplets on windows.
- Rising damp: water rises from the ground through the walls, usually affects ground floors and leaves salt deposits or peeling paint on the lower part of the wall.
- Seepage: enters from outside or from a neighbouring home, usually appears at a specific point and worsens with rain.
After a winter of heavy rain, many owners of second homes find structural moisture when they open their properties, so identifying the source correctly before painting avoids spending money on a solution that does not address the real cause.
What indoor humidity level prevents mould
The range set by Spanish regulations
Relative humidity inside the home is not a minor detail. The RITE recommends maintaining relative humidity between 45% and 60% in summer, and between 40% and 50% in winter, and exceeding that limit clearly raises the risk of condensation and mould on walls and ceilings.
An affordable hygrometer helps check whether a room stays within that range. Kitchens, bathrooms and bedrooms with poor ventilation are usually where the percentage rises most, especially if clothes are drying indoors or cooking is done without an extractor.
Habits that reduce risk before painting
Before applying any paint, it is worth correcting the cause:
- Ventilate daily, even if just for a few minutes with cross-ventilation.
- Avoid drying clothes inside closed rooms.
- Check that bathroom and kitchen extractors work and are used.
- Move large furniture a few centimetres away from external walls.
- Use a dehumidifier in the most affected areas during the coldest months.
No paint, however good, replaces these habits: it helps contain the problem on the surface, but does not correct excess vapour in the air.
Preparing the wall before painting: essential steps
Clean and treat mould, never paint directly over it
A common mistake is applying a coat of paint over a mould stain without treating it. The fungus stays alive under the new layer and reappears within weeks. The correct approach is to clean the surface with a fungicidal product, let it dry completely, and only then apply a primer or sealer before painting. If humidity is structural (rising damp or seepage), no decorative paint solves the source; water entry must be fixed first.
For walls with recurring condensation, it is worth considering paints with anti-mould and anti-condensation function, which help the surface to breathe and make it harder for the fungus to establish itself, although as already mentioned, always combined with better ventilation.
Textured coating damaged by humidity: what to do
In many Spanish homes, especially those built between the 1970s and 1990s, walls still have gotelé (sprayed textured coating on walls or ceilings). When a gotelé area has suffered repeated humidity, the texture usually ends up stained, flaking or even loose in some places, and it is common for the client to take the opportunity to remove it at the same time as treating the humidity.
There are two main types. Temple-based gotelé softens with water and can be scraped off relatively easily; plastic gotelé repels water, so wetting and scraping it does not work, and it is either sanded or covered with smoothing compound. A simple test with a damp cloth on an inconspicuous area shows which type it is before deciding the method. Gotelé removal can be requested on affected walls or ceilings as part of an interior painting job, leaving the surface smooth before applying a sealer first and then the final paint.
What to do in practice: from inspection to quote
| Step | What it involves | Why it matters |
|---|---|---|
| Identify the type of humidity | Observe where it appears, whether there are salt deposits or only surface stains | Each cause needs a different treatment |
| Correct the cause | Improve ventilation, repair seepage, treat rising damp | Painting without this does not last |
| Clean and treat mould | Fungicide, complete drying, sealer | Prevents the fungus from reappearing under the paint |
| Check the state of the gotelé | Humidity test to know whether it is temple-based or plastic | Determines whether to scrape, sand or cover with smoothing compound |
| Request a quote with photos and videos | Show the actual condition of affected walls | Allows an accurate price before starting |
When a quote is calculated per square metre, it is worth remembering that this figure is always indicative, never definitive, because two walls with the same area can hide cracks, degraded plaster or different humidity beneath the paint. The final price can only be confirmed after assessing the actual state of the surface, either with photos and videos or with an on-site visit, two methods that work equally well. That is why photos and videos of affected areas should always be requested before closing any quote, precisely to avoid surprises mid-job.
Also, all agreed scope (which walls are treated, whether the ceiling is included, whether gotelé is removed) is recorded in writing, visible to both client and professional, which prevents confusion once work begins.
Frequently Asked Questions
It is not recommended. Mould should be cleaned first with a fungicidal product and the surface left to dry completely; painting over it without this step causes the fungus to reappear soon, even if the paint has anti-mould function.
Condensation usually appears in high areas, corners and near windows, especially in winter, and improves with ventilation. If the stain appears on the lower part of the wall, with salt deposits or peeling paint, it is more likely to be rising damp and requires a different type of treatment.
It helps reduce surface condensation and makes it harder for mould to grow back, but it does not replace ventilation or correction of the cause. It works better as a complement, not as a sole solution.
The usual reference in Spain, according to the RITE, places recommended relative humidity between 40% and 50% in winter. Above 60% the risk of condensation and mould clearly increases.
Yes, it is a good time to consider it, especially if the texture is stained or loose in some places. First it is worth identifying whether it is temple-based or plastic gotelé, as this determines whether to scrape, sand or cover with smoothing compound before painting.
Ready to paint?
Get free quotes from verified local painters in minutes. No commitment.









